Flip book element

MPC 301 Aliphatic Polyurethane For Finish Coat (1gal)

MPC-301 is a two-component, high-solids, aliphatic polyurethane coating designed as a UV-stable, chemical-resistant topcoat. It gives a lustrous appearance and demonstrates excellent physical properties and resistance to industrial traffic. It can be applied over an epoxy primer or used to coat an existing epoxy or urethane coating. This product is also ecological and contains no VOCs.

Contact us for pricing based upon volume at 800-413-1427. Freight Applicable





     

     

    SKU: MPC 180-1 Categories: , Tag:
    Read more

    MPC 180 Vapor Moisture Barrier Fast Cure (3gal)

    MPC-180 100% solids, two-component epoxy coating designed for controlling moisture vapor emissions on new or deteriorated concrete floors. We recommend applying in areas of high humidity or wet concrete. When applied at a thickness of 18 mils, it exceeds ASTM F3010 product requirements for vapor permeance. This coating will withstand moisture vapor emission rates up to 25lbs./24hrs./1000 ft2 when applied properly. Known for its fast cure process

    Contact us for pricing based upon volume at 800-413-1427. Freight Applicable





       

       

      Read more

      MPC 160 Vapor Moisture Barrier (3gal)

      MPC-160 100% solids, two-component epoxy coating designed for controlling moisture vapor emissions on new or deteriorated concrete floors. We recommend applying in areas of high humidity or wet concrete. When applied at a thickness of 18 mils, it exceeds ASTM F3010 product requirements for vapor permeance. This coating will withstand moisture vapor emission rates up to 25lbs./24hrs./1000 ft2 when applied properly.

      Contact us for pricing based upon volume at 800-413-1427. Freight Applicable





         

         

        Read more

        MPC 150 Epoxy Clear Flooring Kit Fast Cure (3gal)

        MPC-150 is a 2-component, 100% solids, self-leveling, and high-build epoxy floor coating made for fast cure. Designed as a protective floor coating on concrete over an existing epoxy coating, or to create metallic/decorative flooring systems. Perfect for acting as a binder component for resurfacing or patching surfaces exposed to severe and aggressive industrial environments. MPC-150 emphasizes specifically formulated cycloaliphatic coating; therefore, reducing water spotting and amine blushing while providing excellent adhesion, abrasion, impact, and chemical resistance. This seamless coating from Latux is in a wide number of colors. It also allows a top-coated with a variety of products to achieve different gloss finishes and textures. This coating contains no solvent, and is compliant with the CFIA regulations for indirect food contact and meets the VOC regulations limit of under 100 g/L for architectural floor coatings. This emphasizes in its fast cure system.

        Contact us for pricing based upon volume at 800-413-1427. Freight Applicable





           

          Read more

          iQ Tile Saw Blade 10″ – Latux

          $120.00

          10mm rim height fo long life. The re-designed diamond section provides fast chip-free cuts on hard ceramics, porcelain, granite, and other hard dense materials. 

          Read more

          Multiquip Plaster/Mortar WM120SHHD Mixer

          $3,100.00

          No one manufacturer offers such an extensive variety of tried and tested plaster/mortar mixers designed to meet your needs.
          • Powered by a reliable  Honda GX390 gasoline engine
          • Mixes up to 12 cubic feet (340 liters) of material
          • Greatly reduced maintenance – no V-belts, pulleys, clutches or gears
          • Hydraulic dump increases production reduces operator fatigue
          • Hydraulic drive mixes larger lower slump loads – ideal for high-production requirements

          Hey! Need Financing? CLICK HERE

          SKU: WM120SHHD Categories: , Tags: ,
          Read more

          Multiquip Plaster/Mortar WM90SH8 Mixer

          $3,300.00

          Setting the standard for quality and dependability
          • Mixes 9-cubic feet (248 liters) of material
          • 3-hp, 230-volt single-phase electric motor
          • Wider dump shoot for faster, easier pours
          • Strong tubular steel frame with forklift pocket
          • Solid steel axle with large B78-13 highway tires
          • Double-sealed bearings with greaseable shaft seals
          • Powder coat paint with a lasting durable finish

          Hey! Need Financing? CLICK HERE

          SKU: WM90SH8 Categories: , Tags: ,
          Read more

          Multiquip Plaster/Mortar WM90SE Mixer

          $3,300.00

          Setting the standard for quality and dependability
          • Mixes 9-cubic feet (248 liters) of material
          • 3-hp, 230-volt single-phase electric motor
          • Wider dump shoot for faster, easier pours
          • Strong tubular steel frame with forklift pocket
          • Solid steel axle with large B78-13 highway tires
          • Double-sealed bearings with greaseable shaft seals
          • Powder coat paint with a lasting durable finish

          Hey! Need Financing? CLICK HERE

          SKU: WM90SE Categories: , Tags: ,
          Read more

          Create a Flip Book for any product category. You can also select custom posts.